Installing an Aprilaire 700 Humidifier in your home is a great way to regulate the humidity levels in your home, ensuring your family is comfortable and healthy. The Aprilaire 700 is an easy to install unit that can be completed in a few hours with the correct tools and knowledge.
Before starting the installation, it’s important to note that the Aprilaire 700 requires a minimum of 18 inches of clearance from any combustible materials. This includes walls and ceilings.
Tools and Supplies Needed
Before starting the installation, make sure you have the following tools and supplies:
Screwdriver
Drill
Screws
Aprilaire 700 Humidifier
Duct Tape
Level
Hose Clamps
Condensate Pump
Step 1: Install the Mounting Plate
The Aprilaire 700 comes with a mounting plate that needs to be installed before the unit can be attached to the wall. Start by marking the wall where the mounting plate will be installed. Then, drill the holes for the mounting screws.
Using the screws provided, attach the mounting plate to the wall. If the wall is uneven, you may need to adjust the mounting plate to ensure it is level.
Step 2: Connect the Humidifier to the Ductwork
Once the mounting plate is installed, the Aprilaire 700 needs to be connected to the ductwork in your home. Start by measuring the distance between the mounting plate and the ductwork.
Using the measurements, cut a length of flexible ducting that will connect the humidifier to the ductwork. Make sure the ducting is securely attached with hose clamps to ensure there are no air leaks.
Step 3: Install the Humidifier
Now that the Aprilaire 700 is connected to the ductwork, you can attach the unit to the mounting plate. Make sure the unit is level before securing it with the screws provided.
Step 4: Connect the Water Line
The Aprilaire 700 needs a water line to provide it with the necessary moisture to regulate the humidity levels in your home. Start by measuring the distance between the unit and the water line.
Cut a length of plastic tubing that will connect the unit to the water line. Make sure the tubing is securely attached with hose clamps.
Step 5: Connect the Drain Line
The Aprilaire 700 also needs a drain line to remove any excess moisture. Start by measuring the distance between the unit and the drain line.
Cut a length of plastic tubing that will connect the unit to the drain line. Make sure the tubing is securely attached with hose clamps.
Step 6: Install the Condensate Pump
If the drain line is located above the unit, you will need to install a condensate pump to remove the excess moisture. Start by measuring the distance between the unit and the condensate pump.
Using the measurements, cut a length of plastic tubing that will connect the unit to the condensate pump. Make sure the tubing is securely attached with hose clamps.
Step 7: Connect the Power Supply
The Aprilaire 700 requires a dedicated power supply in order to operate. Start by measuring the distance between the unit and the power supply.
Using the measurements, cut a length of electrical wire that will connect the Aprilaire 700 to the power supply. Make sure the wire is securely attached and that all connections are secure.
Step 8: Test the Unit
Once the Aprilaire 700 is installed, it’s time to test the unit. Start by turning on the power supply and allowing the unit to run for a few minutes. Then, check the humidistat to make sure the unit is operating correctly.
If everything is working correctly, you can now enjoy the benefits of the Aprilaire 700. The unit will help to regulate the humidity levels in your home, ensuring your family is comfortable and healthy.
Tips and Ideas
Here are some tips and ideas to help make the installation of your Aprilaire 700 Humidifier easier:
Make sure the unit is level before securing it to the wall.
Check for air leaks in the ductwork to ensure the unit is operating efficiently.
Be sure to use the correct size hose clamps to ensure a secure connection.
If the drain line is located above the unit, you will need to install a condensate pump.
Make sure the power supply is securely connected and all connections are secure.
Check the humidistat to make sure the unit is operating correctly.
Installing an Aprilaire 700 Humidifier in your home is a great way to regulate the humidity levels and ensure your family is comfortable and healthy. Following the steps above and using the tips and ideas provided will help make the installation process easier and faster. Once the installation is complete, you can enjoy the benefits of the Aprilaire 700 for years to come.
Images Related to Aprilaire 700 Installation Manual:
wage Blossom Dear aprilaire humidifier installation manual percent snowman Young lady
Aprilaire model 62 basic wiring - YouTube
Wiring Aprilair 700 (60 series humidistat) to a Bryant 383KAV furnance - DoItYourself.com Community Forums
0 Comments
Post a Comment